X-Cam is a completely new ascender cam design, which gives a considerable increase in performance over traditional sharp toothed models.
When tested on new Tectra 11 mm low stretch rope, these ascenders were found to be 25% stronger than their most popular sharp toothed competitor, with average breaking loads of around 675 kg for X-cams versus 535 kg for the established design.
However, the greatest increase in performance is exhibited if the ascender continues to be loaded after the sheath of the rope has ruptured.
In this situation, X-Cams will hold up to 200 kg on the broken sheath and rope cores. Established toothed designs supported only around 30kg in heightec tests - nowhere near enough to support a person.
heightec X-Cam ascenders therefore significantly reduce the possibility of complete system failure by exerting a considerable hold on a rope after the sheath has broken.
The X-cam Compact is ideal as a spare ascender or for use in hauling and rescue systems. It has one upper attachment for versatility and two lower point to separate lanyard and footloop.
| £34.78 |
|
| £29.60 |
| D41 |
| EN 567, EN12481B |
|
|
|
This product is used for the following work methods:work positioning
rope access
|
|
• Learn more ...
|
|